Polysorb masks: benefits for facial skin, indications, what result to expect?
Polysorb - sorbent
"Polysorb" - is a sorbent designed to cleanse the body. It absorbs all harmful substances and eliminates them from the body through natural release. Thanks to this product, the body is completely cleansed and becomes healthier. You could say it's a kind of detox.
Not everyone knows, but the drug is also suitable for skin care. It is important to use it correctly.
The product performs very well in masks, as well as when taken orally . Then the effect is excellent - the skin is cleansed, and harmful toxins that cause problems are removed from the inside.
The main advantages of sorbent in cosmetology are:
- The drug pulls out impurities from the skin, acting like a “sponge”. By the way, it works exactly the same way from the inside.
- After cleansing the pores, they narrow, which prevents new dirt from entering.
- Gives a light effect, like after peeling, that is, the skin is cleansed not just from the outside, but much deeper
- The elasticity of the skin is restored, and accordingly the face looks more toned
- The complexion becomes matte, skin tone is evened out
- Wrinkles are smoothed out and the face looks younger
Cell cleansing is carried out using silicon, which is included in the composition. It eliminates the cause of skin inflammation and acne.
Varieties of post-acne
In addition to atrophic scars - a type of post-acne, which we wrote about separately in another article, there are also post-inflammatory erythema and post-inflammatory pigmentation. Today’s article is devoted to these two phenomena.
Before talking about these unpleasant consequences, it is worth understanding where and why a pimple occurs in the first place. A pimple itself is an inflammation that the body does not allow into the blood, namely: at the site of infection, the capillaries narrow, then expand, building a dense defense of leukocytes. They fight infection, after which they restore damaged tissue and create new blood vessels. Visually the pimple goes away.
If the pimple is squeezed out, the natural healing process is disrupted. The infection can get into the blood, the probability of this is quite high. The vessels are certainly injured and leave marks.
Thus, post-inflammatory erythema occurs due to the accumulation of dilated capillaries, which could have been restored to a healthy epidermis if the pimple had not been pressed in this place. Most often, post-inflammatory erythema appears on light skin. Most Russians and Europeans who deal with the problem of post-acne are susceptible to it. Erythema appears as a pink, red, or purple patch left at the site of the pimple. The color is due to injury to the capillaries in the inflamed area. Sometimes erythema goes away on its own within six months, but not always - it all depends on the individual characteristics of the body.
Post-inflammatory pigmentation - brown spots. The color is due to the increased content of melanin, which occurs due to exposure of aggressive sun rays to unprotected, injured skin. Most often, dark-skinned and dark-skinned people, as well as women over 35 years of age, suffer from this disease due to endocrine changes. In most cases, the cause of pigmentation is inflammation of the papulopustular elements of acne, as well as scratching the area of squeezed out pimples.
Face masks from Polysorb - how to use?
Before preparing masks from Polysorb, it is important to make sure that you do not have allergies. The drug comes in plastic jars or bags with distributed doses. For the test, just take one bag.
Simply apply the product to your hand after diluting it with water. If you don’t have any reaction, then you can safely start preparing the masks. Please note that the standard instructions do not contain information on preparing masks, and therefore it is important to use the recommendations of specialists.
Using masks is quite simple and the most important advice is to keep your skin clean.
Useful properties of polysorb in cosmetology
Polysorb, as a drug as a whole, has a very impressive range of useful properties, including:
- fight against poisoning of any kind: from alcohol to poison;
- dulling of allergic reactions;
- high effectiveness against purulent-septic injuries: burns, ulcers, deep wounds, appendicitis;
- fight against intestinal infections;
- solving problems of intestinal microflora.
These are the main properties declared by the manufacturer. It is not assumed here that the drug will be effective for problematic epidermis, but many years of experience have shown the opposite. Also learn about the properties and uses of blue clay made from this material.
You can learn about all the useful aspects of enterosorbent from other users on the Internet. Almost every day people discover new scenarios for its use.
Classic face mask from Polysorb: recipe
Polysorb
The classic recipe for a mask is considered universal. This face mask made from Polysorb can be used for any skin except dry skin, because there are no emollients in the composition and this can have a bad effect on the overall effect. Thanks to this mask, all inflammations dry out and blackheads are removed.
RECIPE.
You will only need 3 grams of the drug, as well as 30 ml of boiled, cooled water.
- Mix these two ingredients. Try to avoid any lumps.
- The drug will not dissolve completely. It will look like mush.
When everything is ready, apply the mask to your face for 10 minutes. It is important to use it completely. Yes, the layer will be thick, but that’s how it should be.
Polysorb face mask for dry skin with calendula: recipe
There is also a face mask made from Polysorb for dry skin. To avoid injuring her, a decoction of calendula is used as a sedative. The action is almost the same, but it will be easier on the skin and you will not harm it.
RECIPE.
- Take 3 grams of Polysorb and 20 ml of calendula decoction.
- The latter is easy to prepare.
- It is enough to pour 5 g of dry plant with boiling water for 10-15 minutes.
- When the decoction is ready, strain it from the calendula particles and dilute the powder in 20 g of decoction.
Apply the mask also for 10 minutes.
Features of outdoor use
Polysorb has a number of features that are worth considering before using it to solve epidermal problems. These include:
- Ease of the drug. The powder is very light, almost intangible. This one requires care when adding liquids. You need to do this gradually. A large amount at once can lead to the formation of lumps. If the recipe includes other dry substances, then the drug must be mixed with them first.
- The consistency after mixing with water should resemble a thin, but not runny gel.
- All ingredients must be of the best quality. Enterosorbent neutralizes the effect of bad components.
- Application should be carried out along massage lines if it is intended to be used on the entire face. The method significantly increases the effectiveness of any therapy.
Any masks must be applied along the massage lines of the face and neck.
- The mixture must be made immediately before use, and only once. If you leave something “for later,” then all the beneficial properties will be lost.
Some recipes may have their own unique uses.
Face mask from Polysorb with a lifting effect: recipe
Rejuvenating recipe
A face mask made from Polysorb can also be effective in the fight against wrinkles. It, of course, will not solve the problem completely, but it is still very popular because it gives the desired effect. By the way, it is not very long - it lasts just a couple of days.
RECIPE.
You will need a small spoon of gelatin and the same amount of Polysorb.
- To begin with, gelatin is diluted in water. It needs to swell, so we leave it for a while
- Place the finished mixture in a water bath. Add “Polysorb” there
- After cooking, cool slightly and while it is warm, spread on your face.
Keep the mask on your face for 20 minutes, and then simply remove the resulting film.
Effect of application: photos before and after
On various websites and forums there are often comments about the beneficial properties of Polysorb. These are mostly positive reviews from women who are satisfied with sorbent-based masks.
You can find many photos that show dramatic changes on the skin of the face before and after the procedure. Wrinkles become less pronounced, the skin regains elasticity and firmness.
For those women who suffered from inflammatory processes on the face, the skin becomes clear, no trace remains of acne and past problems.
Polysorb masks have long proven themselves to be good. Homemade products are available, but are not inferior in effectiveness to expensive brands. In addition, it is always possible to produce a composition that is needed at a particular moment, for example, moisturizing, absorbent or anti-inflammatory.
Face mask from Polysorb for deep wrinkles: recipe
How to remove wrinkles with Polysorb?
A face mask from Polysorb can smooth out wrinkles a little, but you need to use it constantly. In particular, up to five procedures per week should be carried out.
RECIPE.
- To prepare the product, take 50 ml of water and a large spoon of Polysorb.
- For better results, take mineral water, but without gas.
- Pour it carefully into the preparation and stir constantly.
- The finished mass will be somewhat similar to thick cream.
It is applied for 15-20 minutes and then washed off.
Pharmacodynamics
Polysorb® MP (medical oral) is an inorganic, non-selective, multifunctional enterosorbent based on highly dispersed silica with particle sizes up to 0.09 mm, with the chemical formula SiO2. The sorption capacity of the drug for internal use is 300 m2/g.
Polysorb® MP has pronounced sorption and detoxification properties. In the lumen of the gastrointestinal tract, the drug binds and removes from the body endogenous and exogenous toxic substances of various natures, pathogenic bacteria and bacterial toxins, antigens, food allergens, drugs and poisons, heavy metal salts, radionuclides, alcohol.
Polysorb® MP also sorbs some metabolic products of the body, incl. excess bilirubin, urea, cholesterol and lipid complexes, as well as metabolites responsible for the development of endogenous toxicosis.
Polysorb face mask for deep peeling: recipe
To make deep peeling, a face mask from Polysorb is prepared without additional components, but more of the drug is used.
RECIPE.
- To prepare the solution, 1.5 large spoons of the drug are required, as well as 20 ml of water.
- Combine these two ingredients to obtain a consistency similar to sour cream.
Apply the composition to your face.
While you hold the composition, you may feel a tingling sensation. This is a common reaction, because the composition actively begins to draw out all impurities from the skin, and therefore such a reaction occurs. After rinsing, be sure to treat the skin with cream. It should be either moisturizing or nourishing.
Rules of application
To achieve the desired effect, you must use the mask correctly. There are several recommendations in this regard:
- the composition is applied only to cleansed and steamed skin;
- the leather is processed in layers, and each time you need to wait for the previous one to dry;
- the composition can be applied not only to the face, but also to the neck and décolleté;
- The residue is washed off with warm water, after which the skin is always moisturized with cream.
Polysorb belongs to the group of safe drugs, but it is still worth carrying out a test to eliminate the risk of allergies. This is quite simple to do; you just need to treat a small area of skin on your wrist and wait. If after an hour the skin has not changed, there is no redness or rash, then everything is fine.
How long should you keep the Polysorb mask on your face?
Effect of Polysorb
A face mask made from Polysorb should be left on for some time. The product is quite aggressive, and therefore it is not recommended to keep it for a long time. Typically the limit is 10-15 minutes. However, if you feel that you are uncomfortable or have a reaction, then, of course, it is better to wash off the composition earlier so as not to harm yourself.
Face mask with Polysorb: reviews, effect
On forums, women often share their impressions of certain products. The face mask from Polysorb causes a lot of positive reactions.
Review 1
Review 2
Review 3
Review 4
Review 5
Nosological classification (ICD-10)
- A05.9 Bacterial food poisoning, unspecified
- B19 Viral hepatitis, unspecified
- K59.1 Functional diarrhea
- K63.8.0* Dysbacteriosis
- N18 Chronic renal failure
- R17 Unspecified jaundice
- T50.9 Other and unspecified drugs, medicinal products and biological substances
- T50.9.0* Alkaloid poisoning
- T51 Toxic effects of alcohol
- T56.9 Toxic effect of unspecified metal
- T65.9 Toxic effects of unspecified substance
- T78.4 Allergy, unspecified
- Y57 Adverse reactions during therapeutic use of other and unspecified drugs and medications
- Y97 Factors associated with environmental pollution
- Z57 Occupational exposure to hazards
